News

CompactLine FC Loaders

Smart powerhouse.
The compact class.

Added value. For small tractors.

Tight spaces, small areas and narrow streets. This is where Compact tractors are at their best. Because it’s all about endurance and manoeuvrability while working at full capacity.

Are you part of the smart group of Compact users? Are you a competent representative of the local council, a dedicated service provider? Are you running a small farm or a dynamic horse farm with all the due diligence, or are you a valuable fruit or wine grower? Then you are well aware that: Perfection in these areas can only be achieved by combining Compact tractors with the right front loaders. Best of all, one of outstanding quality: The STOLL CompactLine!

We combine our technical competence with our customers’ most important requirements: Easy to operate. The STOLL CompactLine offers a wide variety of models. From the smallest lifting arms for tractors between 15 and 25 hp, up to the larger FC 550 P for tractors of around 60 hp. Compact at full speed ahead.

See more info on Stoll’s website…

Used PTO – 1000rpm Clockwise Rotation 21spline

Used Zuidberg PTO. 1000rpm CW 21-spline.  Previously installed.  Just the gearbox with no hardware.  Asking $800

Used PTO – 1000rpm clockwise rotation 21-spline

Used Zuidberg PTO. 1000rpm CW 21-spline.  Previously installed. Gearbox only with no hardware. Asking $800

Universal C-Frame Combine Track

Universal C-Frame Combine Track

• 3 Bogie wheel
• Rubber track width: 36”
• Total Length – 95”
• Total Footprint – 3,420 in^2 (per track)
• Track Weight – 4,600# (per track)
• Delivered fully assembled
• Manufacturer Warranty – 18 months and unlimited hours
• Mounts directly to wheel flange
• Adapters and Spacers available
• Roll limiters available 
• Hydraulically tension to 110 bar/ 1,600 PSI
• Fork slots for efficient mounting

Price starting @ $57,510.20/set

New Holland Front Axle Carrier for T4000

New Holland Front Axle Carrier for T4000
No Hardware
Never Used
Sold as-is
$500

Vulcanus S tine 45×12

Vulcanus S tine 45×12

• mounts onto a  2 x 2” square tube
• sold as is

Vulcanus S tine 45×12 with 200mm sweep is $42.50

Vulcanus S tine 45×12 without sweep is $37.50

Zuidberg Front PTO 1000rpm, CCW, 6 spline

New unit, has never been installed

Designed to fit CIH Farmall 95-105V/N tractor models

Comes with all mounting hardware and replacement fuel tank. 

1000rpm, CCW rotation, 1 3/8″ 6 spline output shaft

Asking $2600

Modules for Composite Cast Iron Weights

Modules for Composite Cast Iron Weights

• 400kg (880 lbs) module A
• 400kg (880 lbs) module B
• 600kg (1320 lbs) module A
• 600kg (1320 lbs) module B
• 800kg (1760 lbs) module B

Options Modular Weights

Options Modular Weights

• Implement carrier combined with modular basic steel weight 600kg and 800kg
• Width Cat 2
• Maximum weight of 2000kg (4400 lbs) in the hooks of the optional implement carrier.
• Weight carrier for modules 400kg (880 lbs) (Module A or B), 600kg (1320 lbs) (Module A) and 800kg (1760 lbs)  (Module B)

Front Block Weights – 1450kg (3190 lbs) Basic Weight (Cast Iron) – (Black, Agco Grey, Claas Grey, JD Green)

1450kg (3190 lbs) Basic Weight (Cast Iron) – (Black, Agco Grey, Claas Grey, JD Green)

• 1850kg (2640 lbs) = 1450kg (3190 lbs) + 400kg-B (880 lbs) Composite Weight
• 2050kg (4510 lbs) = 1450kg (3190 lbs) + 600kg-B (1320 lbs) Composite Weight
• 2250kg (4950 lbs) = 1450kg (3190 lbs) + 800kg-B (1760 lbs) Composite Weight
• 2450kg (5390 lbs) = 1450kg (3190 lbs) + 400kg-B (880 lbs) + 600kg-B (1320 lbs) Composite Weight
• 2850kg (6270 lbs) = 1450kg (3190 lbs) + 800kg-B (1760 lbs) + 600kg-B (1320 lbs) Composite Weight
• Modern and compact design
• Width Cat 2
• With this Design, there is very little if any interference with the Standard Lights of the Tractor.
• Includes Cat 3-Hole 2 balls, Top link pin with locking clips, towing hook and storage box