Products | Frontlink Inc

Front Block Weights

January 7, 2014

775kg (1705 lbs) Concrete Weight. (Mix Died Black)

Block Weights 775kg (1705 lbs) Concrete Weight. (Mix Died Black) Modern Design Width Cat 2 With this Design, there is very little if any intereference with the Standard Lights of the Tractor.
Picture Rotating The Weight can Convenient be moved around by forklift or pallet jack with the pockets on the bottom of the weight. Includes Cat 3-Hole 2 balls as well as top link pin and locking clip

Front double acting service lines (Front hydraulic remotes)

Two hydraulic hoses and all the fittings on the back of the tractor, including two female connectors for the front of the tractor (provided with dust cap). There are 2 rubber lines that run to the rear remotes and most of the lines T-Fit into the rear remotes.
.Some of the lines pioneer fit into the rear remotes but this is only on certain models. A remote bracket is supplied as an option when the amount of front hydraulic remotes exceeds the amount of postioned holes in the topplate of the front linkage. The remote bracket bolts to the side of the front 3pt hitch on the left hand side (standing in front of the tractor).
This bracket can hold up to 6 sets of remotes (12 lines) depending on how many svc’s the tractor has available.

Electronic Frontlift Control Pro

The lastest innovation from Zuidberg Frontline Systems B.V. is the Electronic Frontlift Control Plus (EFC). This is a fully electronic linkage control with many advantages. EFCpro allows the setting of the minimum and maximum lifting height with the touch of a button.
If the implement is placed in the working position or transport position, the PTO can be switched on or off automatically. Besides that you can easily adjust and use the pressure aggression or pressure relief.
The EFC-Pro has the following Features: Control lift / lowering speed Speed keys (for lift and lower) Pressure aggression / pressure relief Adjustable lifting height – and depth restriction

Electronic Frontlift Control (EFC)

Do you want to pre-program the desired position of the front linkage? Or automatically switch on or off the front PTO, depending on the positon of the front linkage? This is all now possible.
The newest innovation from Zuidberg Frontline Systems is called the Electronic Frontlift Control (EFC), an electronic control-module with numerous possibilities. Once you have set the minimum and maximum limits of the front linkage on the EFC, the position of the front linkage will automatically be controlled by using the lever or switches of the tractor.
The front PTO can automatically be switched on or off when the front linkage system is in working position. So from now on, you can operate the front linkage and the front PTO more efficently, with comfort and safety.

Easy Float

The Easy Float is a control device for the Zuidberg front linkage, suitable for the activities by which a correct contour following and lowering of the ground pressure of the implement is important.
Using the Easy Float on your Zuidberg front linkage leads to a better result of your activities and lower machine costs. The Easy Float has following Functionality: Stepless variable pressure relieve, hand operation outside the cabine Automatic pressure control with readjustments
To activate and deactivate from the cabine Optional: refil kit for automatic pressure control for tractors with OC (open Centre hydraulics) or LS (load sensing hydraulics) system. This set is not necessary if during the activities the hydraulic

7-pole Connector

Complete set to mount the European 7-pole connector at the front of the linkage between the top plate and the towing hook with possibility to mount the connector 4 different ways.
Also it is possible to mount the connector elsewhere at your own choice with the supplied mounting material.

Chain Hangers (for mowers)

A pair of supports that fit onto the front linkage, allowing chains to be mounted to the linkage, for example the depth control chain from the implement (ex. Mower) and springs for front mowers.
Available as a top plate mounting version and a crossbar version (for older tractor and front linkage types).

Accumulator and Pressure gauge (Hitch suspension)

The Accumulator soft ride control protects the tractor, implement and front linakge from shock loads.
A 0.6 litre volume unit is used for linkages from 8kN (1760 lbs) – 35kN (7700 lbs) lift capacity, and 2x 0.6 litre units for 50kN (11000 lbs) – 70kN (15400 lbs) lift capacity linkages.
The accumulator in combination with a pressure indicator can be used to delegate the weight of the machine onto the tractor or vice versa. With this manometer it is possible to see how much pressure will be necessary to carry over a certain weight (how much the machine will be heavily loaded or relieved).
The accumulator has an internal pressure of 40 bar and is rated to a maximum pressure of 330 bar.